Help please
Man this forum rocks.....but i need to ask for some suggestions.....what settings would you use for my set-up...such as x-over points, etc...
I was also wondering if I should run the sub amp in stereo or bridged mono?
I am a guitarist and I'm trying to learn some pa stuff.I have read a lot on here but I guess I'm not getting a lot of it.Any help would be very much appreciated.
Mixer=Mackie CFX16
Mains=2-JBLEON15 G2 Powered
Subs=2-Eminence OMEGA PRO-18A-Nominal Impedance* 8 ohms
Power Rating Watts 800W Music Program 1600W Resonance 25Hz Usable Frequency Range 40Hz-800HzSensitivity*** 97
AMP=1-Behringer EP2500
DBX PA OF COURSE
I was also wondering if I should run the sub amp in stereo or bridged mono?
I am a guitarist and I'm trying to learn some pa stuff.I have read a lot on here but I guess I'm not getting a lot of it.Any help would be very much appreciated.
Mixer=Mackie CFX16
Mains=2-JBLEON15 G2 Powered
Subs=2-Eminence OMEGA PRO-18A-Nominal Impedance* 8 ohms
Power Rating Watts 800W Music Program 1600W Resonance 25Hz Usable Frequency Range 40Hz-800HzSensitivity*** 97
AMP=1-Behringer EP2500
DBX PA OF COURSE
Comments
Set up a custom 2x3
Stereo tops mono subs...
press the 'program' button then the xover button
set the crossover...
Sub:
BW18@50hz Lopass
LR24 @100hz Hipass
Jbl's
LR24@100hz lopass
Bridge the EP2500 input to 'A' input only turn down the 'B' channel
Follow the instructions here:
http://www.dbxpro.com/forum/viewtopic.php?t=959
Gadget