9015 + BLU-10

ericaden

I have a BLU-10 that acts as my master controller which can control source, mute, and volume in 7 zones. In several of these zones, local control was required and budget would not allow for BLU-8/10's, so 9015's were used. What I am afraid of is that once the source is selected on the 9015, the BLU-10 will not be able to override it. Does anyone know if this is the case or if there is a way to override the source select on the 9015 with a BLU-10 or custom control panel?

Thanks!

Dan Lynch

With default settings, changes made to the BLU-10 or the PC control panel will override the 9015 until the 9015 is changed by the user.

Dan

ericaden

Dan,
Could you please elaborate on \"default\" settings? Neither my PC control or BLU-10 or BLU-8 would override.

Thanks,

Eric

Dan Lynch

Most likely, somebody turned on control port subscriptions. This would cause the 9015 to override everything else. In London Architect, go to the Main layout tab (the red tab), right click on the DSP device and click on Properties. In the properties window, find Control Port Subscribe and set it to No.

Dan