Aethra X5 IR Code doesnt work

Have you tried with Special Mode on the IRIS? Push UP and SEND together and the display will show "Sp". Capture again but be aware you will need to verify the command multiple times.

HTH

lpt wrote:

I am try to control Aethra X5
I have the remote and an IRIS but there are two codes that I cannot learn.
They are the OK button and the (*.) button. Any solution or suggestion?

If you can?t get the IRIS to learn the IR codes (and you can?t get an IRL from anyone else) then hex codes is your only other alternative AFAIK. remotecentral.com has a large archive of hex codes but I don?t see your device listed there.

If you can get your hands on a Pronto remote and if the Pronto can indeed learn the commands correctly, you can then use ProntoEdit to get a copy of the hex codes and then paste them into your IRL with IREdit. Same holds true with an RTI remote and RTIs software. I?m not sure what other learning remotes let you view the hex codes, those are the two that I?m aware of.

HTH