ni2000 lan port

haneyr
haneyr Junior Member
in AMX Hardware
I have an older NI2000 that today the LAN port stopped communicating with the touch panel. I see that both port lights keeping blinking but there is no link to the switch or directly to the touch panel. I can connect to the NI2000 by serial port but not by LAN. Any ideas besides throw it away.
· Share on FacebookShare on Twitter

Comments

  • ericmedley
    ericmedley Senior Member - 3709 Posts
    Yeah, if the NIC is indeed dead it's probably easier to just grab a new one off ebay.
    · Share on FacebookShare on Twitter
  • haneyr
    haneyr Junior Member
    Problem turned out to be very strange. The system works in my test bench setup. But when I used a smaller 4 port LAN hub I got no connection from the CV12 touch panel and the NI2000. I tried two other hubs and got the same problem. But when I went to a 16 port hub it all worked. So not sure what the problem is or with what device. But I will use the working hub and go from there for now.
    · Share on FacebookShare on Twitter

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Format
SpoilerCodeQuote
Heading 2Heading 1
Emoji
:):D:(;):/:o:s:p:'(:|B):#:*<3o:)>:)
Url
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file
Comment As ...

Categories