Touch Panels falling offline when using the same WAP

Rejoicejohn

Hi Friends,
I greatly love this site as I got much help from here to increase my learning curve.I have just a beginner in AMX programming, but i am having some strange issues lately which I have not been able to solve.

In one of our projects, we are having 2 NI3100 controllers in two different rooms. One is a Meeting room having a MVP-7500 and the other is the Managers' office having a MVP-5200i. Of these, MVP-5200i is roaming and has the controller set as Master. Both the Controllers and the WAPs in the rooms are connected to a common switch.

My issue is whenever the MVP-5200i enters into the Meeting room, both the MVP-5200i and MVP-7500 loses it's connection. Otherwise both are working fine. The Wap i am using is the Linksys 4410N set to G only Mode. The SSID is same on both and the channels are also set to 1 and 6 respectively.

Anybody have any idea on what could be wrong?

DHawthorne

It sounds like the kind of thing you would get if they have the same device number.

Rejoicejohn

Thanks for the feedback.
I have put the Touch Panel in the Manager's Office as 10001:1:1 and
the one in the Meeting Room as 10001:1:2

I only changed the System numbers since they are linking to different NI Controllers.
Does that mean I should change the Meeting room Touch Panel to 10002:1:2?

CT-Dallas

What is the connection MODE listed in PROTECTED SETUP>SYSTEM CONNECTION>MASTER CONNECTION>MODE?

If the mode is AUTO or LISTEN, that may be part of the problem.

Rejoicejohn

@Hawthorne,
I tried with the Different Device Nos. Both the Touch Panels are working perfectly.
Thanks once again!!!!

@Dallas
Thanks for the Comments. The Mode is set to URL . I believe that was not the problem since
setting the Touch Panels with different Device Numbers has solved the issue as of now.