Home› DigiTech Forum› GNX Forum Achive› GENERAL› General Discussion and Chatter

crate power block am I doing something wrong

saxcopsaxcop
in General Discussion and Chatter
Anybody use one with there MFX.

I plug into the fx loop and I only get partial power. The knobs on the front dont do anything when I'm plugged into the fx loop.

also whats the \"level\" pot on the back do?
· Share on FacebookShare on Twitter

Comments

  • guitar3456guitar3456
    once you connect to the 1/4\" inputs on the rear panel, the PB is just a power amp and you set the volumes with the GNX output control. In that mode the PB works like a traditional straight power amp 75w/ch

    Level control on rear is for XLR output Line level. Send to additional amp or PA.

    Using the 1/4\" inputs on rear panel are speaker compensated internally and are not adjustable. You can use the cd Line in for uncompensated or direct GNX sound.
    · Share on FacebookShare on Twitter
  • KewlpackKewlpack
    You can force the 150w by depressing the BRIDGE/Mono button on the back. This will be super loud - so watch your ears.

    Check your output levels on your MFX too.
    · Share on FacebookShare on Twitter
  • shreddshredd
    If you're running your GNX in mono, definitely bridge the PB into mono to use full power.

    PS Kewl avatar 'pack. 8)
    · Share on FacebookShare on Twitter
Sign In or Register to comment.