I Give Up

Gary*Gutter · October 2005

No compatable digitech device found. Thats all I can get. Leads are round the correct way. Reinstalled genedit 1.6.
What a crap setup. ??????????
P..d off.
G

Jesus Rules!! · October 2005

Yo, give us all the info you can.

system, gnx?, hook up devices, etc

There is TONS of info on this problem on the old site, check it.
I ended up using a midiman midi sport 2x2, after that, all I had to do was change my targets.

Gary*Gutter · October 2005

Yo Ho Well it used to work. Have not touched a thing since last year. Today it dont want to know. Gnx3 plain midi wire to a d connector on the computer. Thats about it. Gnx works fine on its own.
G

ednrg · October 2005

Start the process of elimination.

1) Are you sure the connections are correctly inserted? Switch the ins/outs on the GNX.
2) Are you sure the cables are in good working order? Try them on another midi device.
3) Are you sure your d connector is functioning?
4) Is the midi being recognized by your operating system?

Gary*Gutter · October 2005

Ins and outs ok.
Cables good.
Assume d connector works.
I tried the gen updater and it blanked out the gnx completly and asid it couldnt get past the leds. So assume the midi connections work.

Bob E. · October 2005

I have exactly the same problem using a Midisport 2x2 between the GNX3 and the laptop. Worked perfectly, didn't use it for months, hooked it up recently, and no joy. The old forum doesn't have the answer. I'm going to try reinstalling both the Genedit and the Midisport software.

iliace · October 2005

\Gary*Gutter\ wrote:

Ins and outs ok.
Cables good.
Assume d connector works.
I tried the gen updater and it blanked out the gnx completly and asid it couldnt get past the leds. So assume the midi connections work.

Which GNX? Are you using MIDI or USB connection?

- Ilia

Gary*Gutter · October 2005

gnx3.
I have a midi wire to the D plug. It used to work. I have just ordered a midi wire which will plug straight into my 2496 card. It would appear that a process is blocking the midi port. But how to get rid of it I dont know. I have reinstalled genedit but no luck.
G*G

Gary*Gutter · October 2005

Well. New midi leads plugged into the soundcard. Settings are correct I think.
Nothing.
Is there anything I need to do to the GNX3 to maybe tell it to recieve midi?
G*G

Gary*Gutter · October 2005

Ha Ha. Me 1 gnx nil.
Sorted the little git.
Plugged into the card and put the leads round the other way.
What a nightmare.
Thanks to all for help.
Now looking for something else to break. :-)
G*G

Mr Mojo Risin · October 2005

Update your drivers, and make sure both the in and out cables are plugged into your GNX.

I Give Up

Comments