9015 as a mixer

Jynx

January 2009 in London Architect with Soundweb London

Hey guys,

I'm hoping someone here can help me out. I need to use a 9015 as a mixer interface for a BLU-16.

Basically I need to have the selector knob assign which fader is controlled by the up/down buttons. Is this possible? If so, where to I start?

I already know how to assign a fader to the up/down buttons on the control inputs. Where to go from here is beyond me.

Cheers!

0 ·

Comments

Dan Lynch

January 2009

http://www.bssaudio.com/phpBB2/viewtopic.php?t=292

Dan

0 · Share on Facebook Share on Twitter
turffssnw

September 2010

I followed the steps in how to make the 9015 select 8 different volumes and it worked great. I know that it is possible to change the percentage that the up/down buttons increase/decrease, but I'm having trouble figuring that out. I am hoping to go in 3dB increments like a standard volume control. Anybody have any more detailed advice on how to do this?

0 · Share on Facebook Share on Twitter
Dan Lynch

September 2010

Doing 3dB bumps isn't posible. You can only bump by % of the fader's travel. The dB value of each bump will be much larger when the fader is near the bottom of its value than when it's near the top.

Dan

0 · Share on Facebook Share on Twitter

This discussion has been closed.