I have a 3100 Central Ni and she just went out.

ronaldinho
ronaldinho Junior Member
in AMX Hardware
Good morning.
I have a 3100 Central Ni and she just went out.
No LED lights up when I connect to the source, the source has changed and nothing.
Can you help?
Its something I do without for assistance?
Would not want to acquire and another, because here in Brazil are very expensive products and the customer is not in order to pay.
I have to resurrect it?
Endendo electronics, but not open it.
Att
· Share on FacebookShare on Twitter

Comments

  • ericmedley
    ericmedley Senior Member - 3709 Posts
    There are so many things that could be wrong that it's not possible to give you any help on the forum. Are you an AMX programmer? Are you an AMX dealer? Let's start with what your skill set is and what you're going to be able to do or not.
    · Share on FacebookShare on Twitter
  • DHawthorne
    DHawthorne Junior Member
    Turn on dipswitch #1 on the back and power cycle it. If it turns on and the lights look normal, the program is locking up (dipswitch 1 disables the programming). If it still doesn't act right, you have little choice but to replace it or send it to AMX for service. If it seems normal after that, you have to go through the program and see if you can find what's going on.
    · Share on FacebookShare on Twitter

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Format
SpoilerCodeQuote
Heading 2Heading 1
Emoji
:):D:(;):/:o:s:p:'(:|B):#:*<3o:)>:)
Url
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file
Comment As ...

Categories