NI-3000

edgelitoc
edgelitoc Junior Member
in AMX General Discussion
Hi there,

I have a NI-3000 just recently service from a customer but I can't connect to the unit using the program port at the back, I have tried to change the baud rate but its still not connecting. Did somebody had encounter it before.
· Share on FacebookShare on Twitter

Comments

  • feddx
    feddx Junior Member
    edgelitoc wrote: »
    Hi there,

    I have a NI-3000 just recently service from a customer but I can't connect to the unit using the program port at the back, I have tried to change the baud rate but its still not connecting. Did somebody had encounter it before.



    Had something similar just happen with an NI-3100. If it's set for DHCP, you can connect it to a network with a DHCP server, and then use the Listen funtion to sniff out the IP (Communication settings/Edit Settings).

    It turns out that my box was cooked. I hope yours is ok, and that this helped you out.
    · Share on FacebookShare on Twitter
  • PhreaK
    PhreaK Senior Member
    What are your LED's doing?
    · Share on FacebookShare on Twitter
  • edgelitoc
    edgelitoc Junior Member
    PhreaK wrote: »
    What are your LED's doing?

    It seems the LED Status(Green) is on , Output(red) is normal, Input(yellow) is normal..
    · Share on FacebookShare on Twitter
  • edgelitoc
    edgelitoc Junior Member
    feddx wrote: »
    Had something similar just happen with an NI-3100. If it's set for DHCP, you can connect it to a network with a DHCP server, and then use the Listen funtion to sniff out the IP (Communication settings/Edit Settings).

    It turns out that my box was cooked. I hope yours is ok, and that this helped you out.


    did you able to try when your ip was set to static
    · Share on FacebookShare on Twitter
  • PhreaK
    PhreaK Senior Member
    Sounds like you may have a dead CF card. If you've got another NI-3000 around you can grab yourself another CF card of equal size (or bigger) and use dd under linux, or win-hex to do an image.

    Alternatively AMX tech support should be able to help you out.

    If you have a search around the forums you'll be able to find some how-to's on doing the card imaging.
    · Share on FacebookShare on Twitter
  • edgelitoc
    edgelitoc Junior Member
    PhreaK wrote: »
    Sounds like you may have a dead CF card. If you've got another NI-3000 around you can grab yourself another CF card of equal size (or bigger) and use dd under linux, or win-hex to do an image.

    Alternatively AMX tech support should be able to help you out.

    If you have a search around the forums you'll be able to find some how-to's on doing the card imaging.

    Well I have to contact tech support, Thanks for the info PhreaK...
    · Share on FacebookShare on Twitter

Categories