Axcent3 RS232 at 115200 baud

Comments

• HARMAN_icraigie Technical Trainer II, Harman Professional University

  August 2009

  jordimgomez wrote: »

  Hello guys,
  
  Has anybody managed to set any of the 6 RS-232 ports of an Axcent3 Pro at 115200 baud? The AMX documentation says those 6 serial ports can be run at that speed but, so far, I haven?t been successful.
  
  Thanks!
  
  Regards,
  Jordi

  
  Can't remember if I ever ran an Axcent3 port that fast, but you will probably want to keep the cable run as short as possible and use CTS/RTS handshaking.

  0 · Share on FacebookShare on Twitter
• TurnipTruck Junior Member

  August 2009

  Yes, but I beleive that the send_command value was 115000 or 115,000.

  0 · Share on FacebookShare on Twitter
• jordimgomez Junior Member

  August 2009

  115k is the trick!!!
  
  Hi again,
  
  I finally found the method to set the Axcent3 DB9 serial ports at 115200.
  
  
  SEND_COMMAND RS232_1, 'SET BAUD 115K,N,8,1'
  
  
  Thank you for your help!
  
  Regards,
  Jordi

  0 · Share on FacebookShare on Twitter