Home› AMX Forum› NetLinx Studio
Options

buttons become "on" state automatically

yanghua_angelyanghua_angel Junior Member
in NetLinx Studio
i send my file to master,and i do not push any button .But the button that feedback are chosen "channel" all become "on" state automatically.i don't know why become this .
i use the master is three NI-4100,and use the master to master .for example , 1 to 2 ,1 to 3, 2 to 1,2 to 3 ,3 to 1,3 to 2.This use will bring the problem that i said?? i don't know
anybody has advice.thanks.
· Share on FacebookShare on Twitter

Comments

  • Marc ScheibeinMarc Scheibein Junior Member
    yanghua_angel wrote: »
    i send my file to master,and i do not push any button .But the button that feedback are chosen "channel" all become "on" state automatically.i don't know why become this .anybody has advice.thanks.

    Do you have codelines like
    DEFINE_PROGRAM
    [dvPanel,1] = [1]
    [dvPanel,2] = [1]
    etc?

    These feedbacks are always true, so all the buttons will turn on.
    Studio's Code Wizard is creating the feedback lines in this way, to be possible to add and compile them into code. You have to modify these lines for your requirements.

    If not, please post a part of your feedback code.
    · Share on FacebookShare on Twitter
  • yanghua_angelyanghua_angel Junior Member
    Marc Scheibein wrote: »
    Do you have codelines like
    DEFINE_PROGRAM
    [dvPanel,1] = [1]
    [dvPanel,2] = [1]
    etc?

    These feedbacks are always true, so all the buttons will turn on.
    Studio's Code Wizard is creating the feedback lines in this way, to be possible to add and compile them into code. You have to modify these lines for your requirements.

    If not, please post a part of your feedback code.

    no ,nothing in the define_PROGRAM ,even i send the empty programme,it also will become that.i think
    maybe the touchpanel's problem.i use the 5200,the new type of the touchpanel.
    · Share on FacebookShare on Twitter
  • kbeattyAMXkbeattyAMX Junior Member
    Is the 5200 connected and defined in the control system code? Just try to identify if the buttons are lighting regardless of connection to a control system.
    · Share on FacebookShare on Twitter
  • yanghua_angelyanghua_angel Junior Member
    kbeattyAMX wrote: »
    Is the 5200 connected and defined in the control system code? Just try to identify if the buttons are lighting regardless of connection to a control system.

    when the touchpanel is disconnected the master,the botton is off, but just connect the master the botton will become on immediately and automatically.
    · Share on FacebookShare on Twitter
  • kbeattyAMXkbeattyAMX Junior Member
    Is there any programming in the master? If so, please post the code so we can help you.
    · Share on FacebookShare on Twitter
  • Spire_JeffSpire_Jeff Formerly Caffeinated Programmer
    What channel and port codes are being used on the buttons that are turning ON?

    Jeff
    · Share on FacebookShare on Twitter
  • ColinColin Junior Member
    Master to Master
    yanghua_angel wrote: »
    i send my file to master,and i do not push any button .But the button that feedback are chosen "channel" all become "on" state automatically.i don't know why become this .
    i use the master is three NI-4100,and use the master to master .for example , 1 to 2 ,1 to 3, 2 to 1,2 to 3 ,3 to 1,3 to 2.This use will bring the problem that i said?? i don't know
    anybody has advice.thanks.

    If I am reading the above correctly, you have Master 1 connected to 2 & Master 1 connected to 3 but then you have pointed 2 back to one etc, you should only have 1 Master with the other 2 masters in the URL Listing but not on all 3

    Hope this helps

    Cheers
    · Share on FacebookShare on Twitter
Sign In or Register to comment.