question about nexia?

Tassadar · August 2007

this command is unworkable:
SEND_STRING rsNexia, 'SET 1 PHPWR 129 1 1'
But i have answer from Nexia.

AMXJeff · August 2007

Tassadar wrote:

this command is unworkable:
SEND_STRING rsNexia, 'SET 1 PHPWR 129 1 1'
But i have answer from Nexia.

// I think you will find you need a line feed... Do not know exactly what you mean by unworkable...

SEND_STRING rsNexia, "'SET 1 PHPWR 129 1 1',10"

yuri · August 2007

check baudrate

SEND_COMMAND dvNexia, "'SET BAUD 38400, N, 8, 1'";

and this is an example of a command to a Nexia

SEND_STRING dvNexia, "'RECALL 1 PRESET 1001', $0D";

to recall preset 1

Chip Moody · September 2007

I believe Jeff used the correct delimiter - a linefeed character ($0A) rather than a carriage return ($0D)

- Chip

AMXJeff · September 2007

Correct

Yea Chip is right that I am right. But CHIP your hex codes are wrong, I guess you need to come to another one of my classes... Kidding....

Chip Moody · September 2007

Ahhhhh - it's that Jeff...

I'm sure I have no idea what you're talking about. Those codes look fine to me.

VladaPUB · February 2008

<LF> on every line end !

Try

SET 1 INPMUTE 2 3 0<LF>

WHERE

1 IS SYSTEM NUMBER
2 IS INSTANCE ID OD DEVICE WHAT YOU ARE CONTROLING
3 IS INPUT NUMBER
0 IN UNMUTE.

It is working over TCP/IP also , so you dont need RS232/422/485 port

Danny Campbell · February 2008

I don't see PHPWR as a valid command in the Nexia, but it is available in the Audia. There is a PHPWRCS command and a PHPWRPMM command.

The PHPWR command is a phantom power command for the I/O block in the Audia. The PHPWRCS appears to be the same command for the I/O block in the Nexia.

question about nexia?

Comments