Audio Out from 8400

Comments

• AMXJeff Senior Member

  October 2007

  The MVP8400 does not have a mic, just speakers. The MVP8400i does have a mic, and it is dedicated for VOIP. The wired touch panels, do have a mic that you can tie to any mixer using the AV breakout box. Cat5 cable between the breakout box and the touch panel.
  
  Hope this helps...
  

  eddymouse wrote:

  Hi. How can I use the mic audio from the panel?
  Where Can I found documentation about input/output audio from the panel?
  Thanks a lot
  Alex

  0 · Share on FacebookShare on Twitter
• eddymouse Junior Member

  October 2007

  AMXJeff wrote:

  The MVP8400 does not have a mic, just speakers. The MVP8400i does have a mic, and it is dedicated for VOIP. The wired touch panels, do have a mic that you can tie to any mixer using the AV breakout box. Cat5 cable between the breakout box and the touch panel.
  
  Hope this helps...

  
  Sure? If I look here
  http://www.amx.com/products/MVP-8400.asp
  
  it says:
  Built-in Speakers (2) and microphone
  
  How can I use it?
  Thank's a lot
  Alex

  0 · Share on FacebookShare on Twitter
• AMXJeff Senior Member

  October 2007

  If there is actually a mic on the 8400, it was for future use.
  

  eddymouse wrote:

  Sure? If I look here
  http://www.amx.com/products/MVP-8400.asp
  
  it says:
  Built-in Speakers (2) and microphone
  
  How can I use it?
  Thank's a lot
  Alex

  0 · Share on FacebookShare on Twitter
• eddymouse Junior Member

  October 2007

  8400i audio
  
  If I use 8400i , can I use the mic audio? I need to send the audio to an external device
  Thanks a lot
  Alex

  0 · Share on FacebookShare on Twitter
• ericmedley Senior Member - 3709 Posts

  October 2007

  eddymouse wrote:

  If I use 8400i , can I use the mic audio? I need to send the audio to an external device
  Thanks a lot
  Alex

  
  I beleive it is only for the VOIP/Intercom function, not for external use.

  0 · Share on FacebookShare on Twitter
• eddymouse Junior Member

  October 2007

  How can I do? I need a wireless panel with the feature of mic line. Does exist a panel with this feature?
  thanks and sorry for my English.....

  0 · Share on FacebookShare on Twitter
• ericmedley Senior Member - 3709 Posts

  October 2007

  eddymouse wrote:

  How can I do? I need a wireless panel with the feature of mic line. Does exist a panel with this feature?
  thanks and sorry for my English.....

  I beleive, at this time, you're out of luck. It has been a wish of many of us for some time now.
  
  You might put it in as a feature request with tech support.

  0 · Share on FacebookShare on Twitter
• thomas.jud Junior Member

  October 2007

  Intercom with another AMX Panel is possible with MVP8400. You need a software for activate the audio-channel to the other panel's. We setup a door intercom with a CV7 and a MVP8400. But the sound is pretty bad....
  If you need this Code please write again. Im not in the company tonight....

  0 · Share on FacebookShare on Twitter
• eddymouse Junior Member

  October 2007

  Thanks thomas. Please, send me the code at the email beta @ blulaboratori . org ( without space)
  Thank's a lot.
  alex

  0 · Share on FacebookShare on Twitter
• Ishlachi Junior Member

  October 2007

  Here is a note from the NXT-CV7 manual.

  NXT-CV7.jpg 10.7K

  0 · Share on FacebookShare on Twitter