Issues with TuneSuite

mpullin wrote:

Reviving this thread because I have an issue with TuneSuite that I wanted to know if anyone else had experienced.

The TUNE command (e.g. TUNE=77) sometimes doesn't respond. When I turn on the XM radio in the morning and give it a command like TUNE=140, the virtual device for the tuner either says nothing or returns something like ERR=FREQ RANGE (don't remember the exact wording of the error message) despite the fact I'm sending a valid XM station to an XM tuner. The station refused to change no matter how many times I sent the command.

My workaround for this is to poll each tuner with TUNE? every minute.
I noticed that after sending this poll the station would change correctly after a subsequent TUNE=. Since I have added this I haven't had any problems changing channels in the morning. Anyone else experience this? I'm just curious since I have already solved the problem, but I have no idea why this happens.

DEFINE_FUNCTION INTEGER fnFREQ_CHK(CHAR strCmd_String[])
{
    STACK_VAR
    FLOAT fValue
    
    fValue = ATOF(strCmd_String)
    Switch (nTuner_Bands[nRequested_Tuner])
    {
        Case 0:        // Don't know yet - let it go
        { return 1 }
        Case 1:        // AM
        { 
            If (fAM_min <= fValue && fValue <= fAM_max)
            { return 1 }
            Else { return 0 } 
        }
        Case 2:        // FM
        { 
            If (fFM_min <= fValue && fValue <= fFM_max)
            { return 1 }
            Else { return 0 } 
        }
        Case 3:        // WX
        { 
            If (fWX_min <= fValue && fValue <= fWX_max)
            { return 1 }
            Else { return 0 } 
        }
        Case 4:        // XM
        { 
            If (fXM_min <= fValue && fValue <= fXM_max)
            { return 1 }
            Else { return 0 } 
        }
    }
}

mpullin wrote:

Thanks Jeff. I was considering reporting it but since it didn't pose an immediate problem to me, I figured I would just see if the issue was known first.

troberts wrote: »

Hey All,
I am using a TuneSuite for the first time. I have firmware version 2.1 in my ADA TuneSuite, I noticed in the help file for the AMX module v2.2 it says the module was written for firmware version 1.1 and below. Can anyone tell me if this is going to be an issue? I am assuming it is, since I only have the module loaded "as is" and I cant control the tuner, nor do I ever get any RX back from the tuner. Can someone shed some light on this? I am using an ISO-CAT II to connect, if that helps.
Thanks