XM Tuner module

troberts Member

January 2006 in Residential Forum

Does anyone know of an AMX module for any manufacturer's XM Tuner? I know there is one for the Antex Sirius receiver, but I see nothing the Antex's XM receiver nor do I see a module for any XM receiver.

This doesnt seem right especially since C******* has there own XM tuner plus modules for other manufacturer's XM tuners. Time to catch up guys!!

0 ·

Comments

wcravenel Junior Member

January 2006

http://www.amxforums.com/showthread.php?t=862&highlight=Polk

The above thread will get you going with a Polk RT12.

Bill

0 · Share on Facebook Share on Twitter
B_Clements Senior Member

January 2006

More XM

Search InConcert for ADA. ADA (Audio Design Associates) makes a product called TuneSuite. There should be a NetLinx module for TuneSuite.

0 · Share on Facebook Share on Twitter
bano Senior Member

January 2006

troberts wrote:

Does anyone know of an AMX module for any manufacturer's XM Tuner? I know there is one for the Antex Sirius receiver, but I see nothing the Antex's XM receiver nor do I see a module for any XM receiver.

This doesnt seem right especially since C******* has there own XM tuner plus modules for other manufacturer's XM tuners. Time to catch up guys!!

This module will work for the Antex XM receiver. The only change is the baud rate......which amx tech support kindly adjusted.

Good Luck!

ANTEX_SRX3_Comm_9600.zip 12.8K

0 · Share on Facebook Share on Twitter
ondrovic Junior Member

August 2006

is this the same one that can be downloaded in InConcer?

0 · Share on Facebook Share on Twitter
bano Senior Member

August 2006

ondrovic wrote:

is this the same one that can be downloaded in InConcer?

I believe so, however this module was sent to me prior to being offered from InConcert.

0 · Share on Facebook Share on Twitter
funkyskier Junior Member

August 2006

Polk XRT12

I have a module converted from Cre$tron, that works on the Polk XRT12. Its a little messy, but gets the job done and is RS-232. Reply and I will post it up.

0 · Share on Facebook Share on Twitter
ondrovic Junior Member

August 2006

funkyskier wrote:

I have a module converted from Cre$tron, that works on the Polk XRT12. Its a little messy, but gets the job done and is RS-232. Reply and I will post it up.

I would like to take a look at it if you dont mind

Thanks

0 · Share on Facebook Share on Twitter

XM Tuner module

Comments

Leave a Comment

Categories