How to set D:P:S for devices

Karthik
Karthik
in AMX Technical Discussion

How to set Device number for devices which not shown in netlinx online tree and Webconsole .

Please give any Suggestion .

· Share on FacebookShare on Twitter

Comments

  • zack.boyd
    zack.boyd Smacks Keyboard Repeatedly

    I'm guessing the device you're trying to reach has network settings making it unreachable.

    Check the device's install manual for defualt IP, DHCP/Static procedures, and put your machine on the applicable subnet.

    · Share on FacebookShare on Twitter
  • Karthik
    Karthik

    I have set IP-address and subnet.Its pinging in Telnet using IP-Address .

    I have connected the devices to network switch in 2nd port and i have set D:P:S as 0:4:1.

    Its correct or any Other D:P:S will change.

    · Share on FacebookShare on Twitter
  • zack.boyd
    zack.boyd Smacks Keyboard Repeatedly

    It seems like you may need some broader assistance. I suggest contacting Harman Tech support to walk you through the basics or going through the College of AMX training track. Look at the Control System Commissioning Track.

    · Share on FacebookShare on Twitter
  • HARMAN_quirk
    HARMAN_quirk Harman Professional Tech Support

    @Karthik, this is one of those things that is more easily done and explained on the phone during a remote session.

    Please give us a call at: +1-844-776-4899

    · Share on FacebookShare on Twitter

Categories