Options
Test Mics option for Polycom Soundstructure DSP
ajish.raju
chief evangelist of favante
I was able to do a test mics option with Biamp DSP, where the Biamp will send serial strings based on if the mics are working or not when a pink noise is generated.
I need to do the same with Polycom Soundstructure and i am not able to figure if there is any option available to achieve this. A client was able to achieve this functionality for a previous site so i have to figure out what method he had used.
I was not able to find a query commands for the DSP to show MICS clip levels when the pink noise is generated, so i am open to any ideas.
I need to do the same with Polycom Soundstructure and i am not able to figure if there is any option available to achieve this. A client was able to achieve this functionality for a previous site so i have to figure out what method he had used.
I was not able to find a query commands for the DSP to show MICS clip levels when the pink noise is generated, so i am open to any ideas.
Comments
Envoyé de mon Galaxy Nexus en utilisant Tapatalk
I am not sure you can get the clipping event,
but there is something in there for signals...if I remember correctly.
http://support.polycom.com/global/documents/support/technical/products/voice/soundstructure-meter-data-app-note.pdf
I've used this successfully for putting meter levels on touch panels. Works great. If you need any help implementing, I'll be happy to answer questions.
I have added the dsp file for the site. Used mtrreg level_pre "Table Mic 1" 1$0d for one of the mics but not sending any meter values even after setting the meter data period. Am i using the proper meter.
Sent from my iPad using Tapatalk